Industrial Pest Control in New Jersey
Arnold’s Pest Control provides industrial pest control services to facilities across New Jersey. We’ve been working in industrial facilities on the Turnpike, in Union County and Burlington since 1952. These environments harbor pests that most homes never have to deal with: Norway rats slip in through loading docks, and cockroaches breed in raw material storage with inconsistent temperature. We give your facility a thorough inspection and then build a pest program around what we see.
Industrial pest control services we provide
We inspect all areas of your facility, from dock seals to drainage, and identify entry points and potential pest dwellings. We then build a pest control program around what we find.
Our industrial services cover:
Rodent control and exclusion: trapping, baiting, and sealing the gaps through which rats and mice get in.
Cockroach management: German cockroaches in food-adjacent industrial spaces get a targeted crack-and-crevice treatment; American cockroaches in boiler rooms and utility tunnels get a different treatment.
Termite inspections and treatment: if you’re south of the Raritan, this should be on your annual calendar.
Stored product pest control: Indian meal moths, warehouse beetles, and other insects that infest stored materials.
Bird and wildlife exclusion: physical barriers and deterrents for pigeons, sparrows, and raccoons in loading areas and rooftops.
Spotted lanternfly management: still relatively new to most facility managers, but the aggregations on building exteriors create real nuisance and compliance headaches.
Monitoring and documentation: written reports after every visit that support your audits, health department inspections, and insurance requirements.
Common industrial pests in New Jersey
Route 1 and the Turnpike run through some of the highest pest-pressure commercial real estate on the East Coast. Standard residential treatments will not solve the problems that develop in these environments.
Norway rats are the worst. They cluster around loading docks and dumpster pads, then squeeze their way inside through gaps a quarter could fit through. Once they get in, they contaminate products, chew packaging, and gnaw electrical wiring (a known cause of warehouse fires).
German cockroaches are a virulent pest in any industrial facility where food is present. Each cockroach egg case holds around 40 eggs, and a female produces several of these over her lifetime. In the warm, damp conditions of most industrial kitchens, this can develop into a significant infestation within four to six weeks. Time is of the essence with them.
Termites are especially aggressive in southern New Jersey. Burlington County, Camden County, and the Atlantic County shoreline. The sandy soil supports termite colonies especially well.
Brown marmorated stink bugs seek overwintering sites in building envelopes throughout northern and central NJ. They contaminate products in packaging areas, and a wall covered in them is the last thing you want a client or an auditor seeing on their way in.
Spotted lanternfly is a permanent fixture throughout the state. Large aggregations appear on the outside walls of industrial sites near wooded areas, particularly along the Delaware Valley. The pest itself doesn’t infest buildings, but the mess they leave is a real problem for facility managers dealing with client visits or regulatory inspections.
Industries and facilities we serve
Arnold’s works with industrial operations at every scale across New Jersey:
Warehouses and distribution centers. The Meadowlands, central NJ, the Route 1 corridor. These facilities have constant pest pressure due to inbound shipments, dock doors that open and close hundreds of times a day, and major roads and rail lines with high rat populations.
Manufacturing plants. Light assembly, heavy production, everything between. Each facility type has pest vulnerabilities tied to its materials, processes, and building age. A pharmaceutical clean room and a metal fabrication shop need very different pest programs.
Food processing and cold storage. Regulatory compliance means documented pest management, such as inspection records, treatment logs, and corrective action reports. We provide the paperwork your auditors ask for.
Pharmaceutical and biotech operations. Morris and Somerset counties have significant pharma infrastructure. Contamination control in these facilities is non-negotiable. Our documentation standards meet industry requirements.
Logistics hubs. High-volume facilities with constant truck traffic need pest management that accounts for doors opening frequently and inventory that changes daily.
How we approach industrial pest management
We follow Integrated Pest Management principles. This means we figure out why pests are getting in before we start treating symptoms.
We inspect before we treat. Every part of your facility gets examined before anyone opens a product case. This assessment informs your program. We don’t have a standard package.
Targeted treatments. Bait stations where baiting is effective. Exclusion, where a physical barrier solves the issue. Crack-and-crevice applications where cockroaches hide. We do not blanket-spray your facility; blanket-spraying is lazy and causes more problems than it resolves.
All technicians are NJDEP-licensed. All Arnold’s technicians hold current New Jersey Department of Environmental Protection commercial applicator licenses, and we adhere to all NJDEP regulations. Continuing education for license renewal is coordinated through the New Jersey Pest Management Association (NJPMA).
Reports come standard. You receive a detailed service report after each visit. It will tell what we found, what we did, and what to monitor before our next visit. Industrial clients need this documentation for quality programs, third-party audits, health inspections, and insurance. We have been writing these reports long enough to know what auditors really look for.
Recurring service, not one-off fixes. One treatment alone will seldom offer a permanent solution to industrial pest problems. We design service schedules matched to your facility’s risk level and seasonal patterns, and adjust as conditions change.
Why Arnold’s for your industrial facility
A family business. We’ve been operating in New Jersey since 1952. We have over seventy years of local experience. Three generations working in NJ industrial environments means we understand the pest problems specific to this state.
Arnold’s Pest Control is affiliated with the Excel Pest Services family for additional resources and technical expertise, and we don’t upsell services you don’t need.
Frequently asked questions
What types of industrial facilities do you service in New Jersey?
Warehouses, distribution centers, manufacturing facilities, food processing plants, pharmaceutical operations, cold storage, and logistics centers.
How often should industrial facilities schedule pest control?
Most industrial facilities are serviced monthly, but the ideal cycle depends on your pest pressures, industry requirements, and facility conditions. Food processing and pharmaceutical operations tend to need more frequent visits. We’ll recommend the right frequency during the initial assessment.
What pest control licenses are required in New Jersey?
The NJDEP Pesticide Control Program requires commercial applicators to hold category-specific licenses and complete continuing education for renewal. Every Arnold’s technician maintains a current NJDEP commercial applicator license.
What does an industrial pest management program include?
An initial facility assessment, a customized treatment plan, regular service visits, monitoring stations where appropriate, exclusion recommendations, and documentation for your compliance records. The details vary by facility and industry.
Do you provide emergency pest control for industrial sites?
Yes. If you discover a rodent during an audit walk-through or spot evidence of infestation before a scheduled inspection, call (908) 276-8062 and we’ll get to you as soon as possible.
Get started with industrial pest control
Call Arnold’s Pest Control at (908) 276-8062 or contact us online to schedule an industrial pest control inspection. With NJ-licensed technicians and over 70 years of New Jersey experience, we’ll assess your pest pressures and recommend a program built around your facility.
View all our pest control services
If pests come back so do we. Guaranteed.
Homeowners and companies love us.
Pests, not so much.
My extended family and I have used Arnold’s Pest control for 20 years for pests like termites, skunks, squirrels, mice, and even rats, with great success. I’ve recently used them for bees, hornets and ants, also with great success. Arnold’s workers are always prompt, professional and honest. Having a long-term relationship with local community trade businesses is good for me and the community.
– Angela O
We have been working with this company since we opened. They are always very responsive and professional. Highly recommended!
–Jess Bakeshop
Brian is the best! This is our 2nd time we called about a squirrel invasion (2 different houses). Talk about good service. He went out and fixed the problem the same day I called. You don’t get this kind of service anywhere. Thank you.
–Faith L.
Talk to us today.
The company
we keep
